Things that you needs:
1.Z3X Samsung2.Root File Download Here
3.Odin3-v3.07 Download Here
4.Pc and Usb Mini Cable
Remember This Before Proceed:
1. The tutorial is only for the Galaxy S4 GT-I9500
2.Users are recommended to back-up all data before rooting the device.
3.The device should have at least an 80 percent charge left on the battery.
4. USB drivers must be installed in the computer with USB Debugging enabled on the device to transfer files between the phone and the PC.
Note: Jasharycellshop cannot be held responsible for anything that goes wrong. Users should proceed at their own risk.
You can now unplug the USB cable to disconnect the handset from the PC.And Proceed to Unlocking
2.Users are recommended to back-up all data before rooting the device.
3.The device should have at least an 80 percent charge left on the battery.
4. USB drivers must be installed in the computer with USB Debugging enabled on the device to transfer files between the phone and the PC.
Note: Jasharycellshop cannot be held responsible for anything that goes wrong. Users should proceed at their own risk.
Tutorial
Step 1: Download both CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5 and ODIN3, and extract the files to the computer.
Step 2: Power off the handset and put it in Download mode by pressing and holding down the Volume Down, Home and Power buttons together. After a warning screen appears, press the Volume Up button to enter Download mode.
Step 3: Run Odin3 v3.09.exe as an Administrator while the phone is Download mode, and connect the Galaxy S4 to the PC via USB cable. If connected successfully, a message showing “Added!!” will appear in Odin’s message box.
Step 4: Now, click on the AP button, and select the CF-Auto-Root file that was extracted in Step 1.
Step 5: In Odin, check the “Auto Reboot” and “F. Reset Time” options.
Step 6: Click on the Start button in Odin to begin the flashing process.
Step 7: Once the process is complete, the Galaxy S4 will restart and a PASS message with green background will appear in the left-most box at the top of Odin.
Step 1: Download both CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5 and ODIN3, and extract the files to the computer.
Step 2: Power off the handset and put it in Download mode by pressing and holding down the Volume Down, Home and Power buttons together. After a warning screen appears, press the Volume Up button to enter Download mode.
Step 3: Run Odin3 v3.09.exe as an Administrator while the phone is Download mode, and connect the Galaxy S4 to the PC via USB cable. If connected successfully, a message showing “Added!!” will appear in Odin’s message box.
Step 4: Now, click on the AP button, and select the CF-Auto-Root file that was extracted in Step 1.
Step 5: In Odin, check the “Auto Reboot” and “F. Reset Time” options.
Step 6: Click on the Start button in Odin to begin the flashing process.
Step 7: Once the process is complete, the Galaxy S4 will restart and a PASS message with green background will appear in the left-most box at the top of Odin.
You can now unplug the USB cable to disconnect the handset from the PC.And Proceed to Unlocking
Unlocking:
1.Open Z3X Samsung tools
2.Select Correct unit
3.Select Z3X Box Serial Port in Com port
4.Read Info and Click Unlock
5.Wait until Finish
Finish Product
Comments
Post a Comment