Is your Cloudfone Excite 500d hang on logo or hang on Android Logo?And doing hard reset using hardware keys not solved the problem..
Flashing it is your last option!That's why i would like to share it here's How To Do it!First Download all files in download links.
Flash tools
Firmware
2. Install python( python-2.7.msi)；
3. Open the phone，Ensure that the battery has enough power，Use USB Connecting to PC，And make sure that the phone Debug port turned，if not，please Menu-> System Settings -> Developer Options - >USB debug，make sure this options is selected4. If this is the first time use，Windows will detect the new port，And prompts to install the driver，Follow the prompts，choose USBDriverADB->win32 directory(The driver can only support 32-bit operating system)
5. After the driver is installed,Keep the phone is opened and connecting to PC，run 3G emmc upgrade tool ,then，The interface should be displayed on the phone line connected，If the interface does not appear，Please go back and check the driver or connection，Or phone status；
6. Set directory files "Browse the firmware where did you put it"
Flashing it is your last option!That's why i would like to share it here's How To Do it!First Download all files in download links.
Flash tools
Firmware
PROCEDURES:
1. Install 3G emmc upgrade tool ,Click Next all the way2. Install python( python-2.7.msi)；
3. Open the phone，Ensure that the battery has enough power，Use USB Connecting to PC，And make sure that the phone Debug port turned，if not，please Menu-> System Settings -> Developer Options - >USB debug，make sure this options is selected4. If this is the first time use，Windows will detect the new port，And prompts to install the driver，Follow the prompts，choose USBDriverADB->win32 directory(The driver can only support 32-bit operating system)
5. After the driver is installed,Keep the phone is opened and connecting to PC，run 3G emmc upgrade tool ,then，The interface should be displayed on the phone line connected，If the interface does not appear，Please go back and check the driver or connection，Or phone status；
6. Set directory files "Browse the firmware where did you put it"
7. Click the Switch to EMMC，The phone will automatically restart and switch mode，Windwos will detect the new port, and prompts to install the driver，Follow the prompts to point to the directory QCTUSBDriver，Select the corresponding file，Complete the driver installation；
8. After the installation OK，click Upgrade(F9)，Start the upgrade process。
8. After the installation OK，click Upgrade(F9)，Start the upgrade process。
9. The screen will turn green, and prompted a successful upgrade。Then，Need to unplug the battery, wait 3 seconds,Open the phone
Comments
Post a Comment